DAELIM Daystar VL125E Service Manual page 233

Electric Starter
Align the rear cover with the case mark and
install the 2 setting bolts.
Tighten the setting bolts exactly.
Installation
Install a new o-ring into the front cover. Coat
the o-ring with oil and install the starter motor
into the crank case.
Tighten the two mounting bolts securely.
Install the starter motor cable, tighten the
terminal nuts securely.
Starter Magnetic Switch
Inspection
Turn the main ignition switch "ON".
There should be phonic signal in battery
voltage while the starter magnetic switch is
depressed.
19-5
Rear Cover Rear Cover
Rear Cover Rear Cover Rear Cover Rear Cover
Rear Cover Rear Cover Rear Cover Rear Cover
Rear Cover Rear Cover Rear Cover
Bolt Bolt Bolt Bolt
Bolt Bolt Bolt Bolt
Bolt Bolt
Bolt Bolt Bolt
Mark Mark Mark Mark
Mark Mark Mark Mark
Mark Mark
Mark Mark Mark
O-Ring O-Ring O-Ring O-Ring
O-Ring O-Ring O-Ring O-Ring
O-Ring O-Ring
O-Ring O-Ring O-Ring
Starter Magnetic Switch Starter Magnetic Switch
Starter Magnetic Switch Starter Magnetic Switch
Starter Magnetic Switch Starter Magnetic Switch Starter Magnetic Switch Starter Magnetic Switch
Starter Magnetic Switch Starter Magnetic Switch Starter Magnetic Switch Starter Magnetic Switch
Starter Magnetic Switch