DAELIM Daystar VL125E Service Manual page 184

Install the new O-ring to frok tube cap bolt.
Install the fork tube cap bolt to fork tube.
CAUTION
!
Do not install the fork tube cap bolt again.
Installation
Install the front fork into the steering stem, top
bridge.
Align the top end of the fork tube with the
upper surface of the top bridge.
Install the fork top socket bolt.
Torque: 2.0kgf-m
Install the fork bottom pinch bolt.
Torque: 3.3kgf-m
NOTE
Be care that the collar is not to seperate.
Front Wheel/Front Fork/Steering
Fork Tube Cap Bolt Fork Tube Cap Bolt
Fork Tube Cap Bolt Fork Tube Cap Bolt
Fork Tube Cap Bolt Fork Tube Cap Bolt Fork Tube Cap Bolt Fork Tube Cap Bolt
Fork Tube Cap Bolt Fork Tube Cap Bolt Fork Tube Cap Bolt Fork Tube Cap Bolt
Fork Tube Cap Bolt
Fork Top Socket Bolt Fork Top Socket Bolt
Fork Top Socket Bolt Fork Top Socket Bolt
Fork Top Socket Bolt Fork Top Socket Bolt Fork Top Socket Bolt Fork Top Socket Bolt
Fork Top Socket Bolt Fork Top Socket Bolt Fork Top Socket Bolt Fork Top Socket Bolt
Fork Top Socket Bolt
O-Ring O-Ring O-Ring O-Ring
O-Ring O-Ring O-Ring O-Ring
O-Ring O-Ring
O-Ring O-Ring O-Ring
Fork Tube Cap Bolt
Fork Tube
14-17