DAELIM Daystar VL125E Service Manual page 198

Disassembly
Install the rear cushion compressor and
attachment.
Tools:
Rear cushion compressor
Rear cushion attachment
CAUTION
!
Avoid the upper joint from damage.
Fix the upper joint, and remove the upper joint
by loosening the lock nut.
Remove the case, spring, lock nut, damper
rubber, and spring adjuster.
CAUTION
!
Be careful when dismantling because of the
strong tension of spring
Inspection
Measure the free length of rear cushion spring.
Inspect the damper rod for winding and
damaging.
Inspect the damper unit for oil leakage.
Inspect the damper rubber for damaging and
crank.
CAUTION
!
Never dismantle and heat damper unit.
Assembly
Install the spring adjuster and damper rubber.
Assembly is done in the reverse order of
disassembly.
NOTE
Install the rear cushion spring making the
small position of pitch face up.
Rear Wheel/Rear Brake/Suspension
Attachment
Holder Nut
Spring
Free Length
Attachment
Rear Cushion Compressor
Spring
15-9