DAELIM Daystar VL125E Service Manual page 199

Rear Wheel/Rear Brake/Suspension
Coat the lock nut with oil to the thread, and
install the rear cushion compressor attachment
into the damper rod.
Coat the upper joint with oil to the thread and
install it into the damper rod.
Fix the upper joint and tighten the lock nut.
Torque: 3.8kgf-m (38N.m)
Tools:
Rear cushion compressor
Rear cushion compressor attachment
Installation
Install the rear cushion.
Install the bolt
Torque: Upper bolt: 3.4kgf-m
Lower bolt: 3.4kgf-m
Rear Fork
Removal
Remove the rear wheel. ( 14-3)
Remove the rear cushion. ( 14-8)
Remove the chain cover.
Loosen the pivot bolt and nut using a box
wrench, and remove the rear fork.
15-10
Nut Nut Nut Nut
Nut Nut
Nut Nut Nut Nut
Nut Nut Nut