Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for DAELIM ROADWIN FI - CATALOG
Summary of Contents for DAELIM ROADWIN FI - CATALOG
- Page 1 OWNER S MANUAL...
- Page 2 This motorcycle is designed to carry the operator and one passenger. WARNING Attempting to change the pre-set maximum speed may cause danger and will void the Daelim warranty. ON-ROAD USE This motorcycle is designed to be used only on the road.
-
Page 3: Table Of Contents
CONTENTS HORN BUTTON ..............16 SPECIFICATION ..............3 ............17 OPERATION INSTRUCTION ..........4 EQUIPMENT USAGE STEERING LOCK .............. 17 ..........4 SAFETY PRECAUTIONS SEAT .................. 17 PRIOR TO STARTING VEHICLE ........5 HELMET HOLDER ............18 CORRECT ATTIRE ............. 5 STORAGE COMPARTMENT .......... - Page 4 ..............31 MAINTENANCE SAFE DRIVING ............... 51 MAINTENANCE SCHEDULE ..........32 ......51 PREPARATION BEFORE DRIVING TOOL KIT ................34 ............52 DRIVING METHOD FRAME AND ENGINE NUMBERS ........34 DRIVING POSITION ............52 MAINTENANCE PRECAUTIONS ........35 PRECAUTION WHEN DRIVING ........53 THROTTLE OPERATION ..........
-
Page 5: Specification
SPECIFICATION... -
Page 6: Operation Instruction
For safety, do not change, alteration or modification the ● part may be tampered with, altered, or replaced with vehicle. parts other than original Daelim spare parts during the Regularly conduct specified maintenance inspections. ● warranty period. As far as any defect caused by contaminated gasoline <Maintenance Inspection Points>... -
Page 7: Prior To Starting Vehicle
PRIOR TO STARTING VEHICLE CORRECT ATTIRE Read user's manual carefully. ● Conduct maintenance checks prior to operation. ● Always maintain vehicle in clean status and carry out ● specified maintenance checks. Make sure to stop engine and stay away from fire when ●... -
Page 8: Operation
OPERATION Operators should naturally fix bodies to keep smooth driving. ● Please check whether or not you are unnaturally strained and ● strung up. Driving pose has a great influence on safe operation. ● Please always maintain the center of your body in the middle of seat. -
Page 9: Cargo
● ● ● ● Pay attention not to overload goods and fasten it tightly ● whiling driving. Do not place kind of cloth materials nearby oil tank cap. ● If the hole in oil tank cap is clogged, oil will not flow freely into the engine which can cause severely engine damage. -
Page 10: Modification
As far as any defect caused by modifications, the ● warranty will be automatically invalidated. ATTACHMENT Except designated attachment by DAELIM MOTOR CO.LTD., ● don’t attach any extra lighting device, because it may cause an early discharging of battery. Carefully inspect the accessory to make sure it does not obscure ●... -
Page 11: Parts Location
PARTS LOCATION x1000rpm... - Page 12 PARTS LOCATION...
- Page 13 PARTS LOCATION...
-
Page 14: Meter Reading And Usage
METER READING AND USAGE x1000rpm Running the engine beyond recommended ● maximum engine speed(the beginning of the tachometer red zone)can damage the engine. x1000rpm... -
Page 15: Fuel Gauge
However, the MIL blinks continuously, check the EMS x1000rpm system. If you are not able to check the EMS system, contact your daelim dealers. The EMS takes fail-safe function, it ● enables to drive only temporary by starting even on conditioned. -
Page 16: Switch Operation
SWITCH OPERATION Do not operate main switch key during ● operation. If the main switch key is placed on ● “ Off ” or “ Lock ” position, all electrical system will not function. Never operate the main switch key ●... -
Page 17: Keys
● ●... -
Page 18: Starter Button
● ●... -
Page 19: Equipment Usage
EQUIPMENT USAGE STEERING LOCK SEAT To lock the steering, turn the handlebars <FRONT SEAT> <REAR SEAT> all the way to the left or right, turn the key To remove the front seat, insert the To remove the rear seat, remove both to LOCK while pushing in. -
Page 20: Helmet Holder
● ●... -
Page 21: Self Inspections Before Operation
SELF INSPECTIONS BEFORE OPERATION ● ● ● ● ● ● ● ●... - Page 22 [REAR BRAKE] Check that the fluid level is above the LOWER level mark with the motercycle <REAR BRAKE FLUID LEVEL> in an upright position. WARNING Brake fluid must be added to the reservoir whenever the fluid level begins to reach Brake fluid may cause irritation.
- Page 24 ● ● ●...
-
Page 25: Clutch
3. Loosen the lock nut at the lower end of the cable. Turn the adjusting nut to If proper adjustment cannot be ● obtain the specified free play. Tighten obtained or the clutch does not work the lock nut and check the adjustment. correctly, see your Daelim dealer. -
Page 26: Fuel
FUEL <FUEL TANK> WARNING The fuel tank capacity including the Gasoline is extremely flammable and reserve supply is : 15 ● is explosive under certain conditions. To open the fuel fill cap; Refuel in a well-ventilated area with 1. Insert the ignition key and turn it the engine stopped. -
Page 27: Engine Oil
ENGINE OIL LIGHTS AND WINKER <ENGINE OIL LEVEL CHECK> <HEADLIGHT, TAILLIGHT> CAUTION Start the engine and make sure the lights Check the engine oil level each day before Running the engine with insufficient turn on. Also check to see if the lights are ●... -
Page 28: Back Mirror
OPERATION BACK MIRROR PRE-RIDE INSPECTION Sit squarely on the seat and check to see if Throttle - check for smooth opening ● WARNING you have a good view behind the vehicle and full closing in all steering positions. by looking at the back mirrors. Also check If the pre-ride inspection is not Lights and horn - check that headlight, ●... -
Page 29: Starting The Engine
STARTING THE ENGINE Always follow the proper starting 2. Once engine is started, pull and release <PREPARATION> procedure described below. throttle grip repeatedly to run engine Before starting, insert the key, turn the idle until engine is heated. ignition switch ON and confirm the This motorcycle is equipped with a side ●... -
Page 30: If Engine Cannot Be Started
The general rules as follows: few times. If the MIL blinks continously when the ● main key is on, inquiry to the daelim 1. Never labour the engine with full NOTE dealer. throttle at low engine speeds. This rule is applicable not only during running-in Do not run engine idle unreasonably. -
Page 31: Riding
RIDING 1. After the engine has been warmed up, <GEAR DOWN OPERATION> NOTE the motorcycle is ready for riding. If you gear down when you need to drastically accelerate speed such as when Make sure side stand is in original 2. -
Page 32: Braking
BRAKING PARKING 1. For normal braking, gradually apply 1. After stopping the vehicle, shift the <ENGINE BRAKE> both the front and rear brakes while transmission into neutral, turn the fuel If you turn throttle grip in reverse, engine down shifting to suit your road speed. brake functions and, if you need stronger cock OFF, turn the ignition switch OFF 2. -
Page 33: Maintenance
These instructions are based on the assumption that the motorcycle will be used exclusively for its designed purpose. Sustained high ● speed operation, or operation in unusually wet or dusty conditions, will require more frequent service than specified in the MAINTENANCE SCHEDULE. Consult your authorized Daelim dealer for recommendations applicable to your individual needs and use. - Page 35 ODOMETER READING(NOTE 1) FREQUENCY REMARK 1,000Km ITEM MONTH BRAKE FLUID NOTE( 3) BRAKE SHOE / PAD WEAR BRAKE SYSTEM BRAKE STOP SWITCH HEADLIGHT ADJUSTMENT SUSPENSION CLUTCH SIDE STAND BOLTS, NUTS, FASTENERS WHEELS / TIRES STEERING HANDLE BEARING If you do not have the appropriate tools or information to conduct maintenance, or if you feel you are not capable to perform maintenance on this vehicle, inquiry to the authorized dealers or repair shops for maintenance and repairs.
-
Page 36: Tool Kit
● ● ● ● ● ● ● ● ●... -
Page 37: Maintenance Precautions
● ● ● ● ● ● ● ● ● ● ● ● ● ●... -
Page 38: Air Cleaner
AIR CLEANER When the element becomes dirty, there 1. Remove the front seat (page 17) will be greater intake resistance, resulting 2. Remove the air cleaner case cover by in decreased power output and increased removing the screws. fuel consumption. 3. -
Page 39: Engine Oil
● ● ● ● ● ● ● ● ● ● ● VJ125E 1000017 ●... -
Page 40: Spark Plug
SPARK PLUG If electrode is stained or plug gap is not 4. Inspect the electrode and center 7. Tighten the spark plug 1/2 turn with a right, satisfactory spark is not produced. porcelain for deposits, erosion or cabon spark plug wrench to compress the fouling. - Page 41 ● ● ● ● ● ●...
-
Page 42: Drive Chain
<ADJUSTMENT> CAUTION Drive chain slack should be checked ● Excessive chain slack could cause and adjusted, if necessary, every ● the chain to come off the sprockets, 1,000km. resulting in loss of control or serious When operated at sustained high speeds ●... -
Page 43: Wheel Removal
See your authorized When installing the wheel, carefully ● bolts. Daelim dealer for this service. fit the left brake disk between the 4. Loosen the axle nut. brake pads to avoid damaging the pads. - Page 44 If this occurs, installation, see you authorized dealer servicing of the brake system will be as soon as possible to verify proper nececcary. See your authorized assembly. Improper assembly may lead Daelim dealer for this service. to loss of braking capacity.
-
Page 45: Brake Pad Wear
If either pad is worn to the cutout, When installing the wheel, carefully replace both pads as a set. ● fit the left brake disk between the See your authorized Daelim dealer for brake pads to avoid damaging the this service. pads. <REAR BRAKE>... -
Page 46: Idle Speed
SIDE STAND Erect main stand and place motorcycle ● in upright position on level ground. Check the spring for damage or loss of ● tension and the side stand assembly for freedom of movement. Check the side stand ignition cut-off ●... -
Page 47: Battery
(causing hard starting If battery acid comes in contact with or other electrical troubles), contact your any of these, flush immediately with authorized Daelim dealer. large amounts of water. If acid contacts the eyes or skin, get CAUTION medical attention. -
Page 48: Fuse Replacement
Ignition coil, Ecu, Fuse C O2 Sensor Ecu, Fuel pump relay, Fuse D Light relay If the fuse immediately becomes ● severed after being changed with the new one, check another problem of the electric system. Contact to Daelim service center. -
Page 49: Bulb Replacement
● ●... - Page 50 [STOP/TAILLIGHT BULB] [WINKER BULB] 1. Loosen the screws and remove the <Front winker bulb> <Rear winker bulb> taillight lens. 1. Loosen the screw and remove the 1. Loosen the screw and remove the 2. Slightly press down on the bulb and winker lens.
-
Page 51: Cable Rubber Part
CABLE RUBBER PART GENERAL CLEANING To preserve the finish of metal parts and A rubber part is assembled on the cable to <IMPORTANT> ● protect the inner cable. paintwork, wash and clean you rmotorcycle Do not wash your motorcycle right after ●... -
Page 52: Storage Guide
STORAGE GUIDE Extended storage, such as for winter, <REMOVAL FROM STORAGE> CAUTION requires that you take certain steps to reduce 1. Uncover and clean the motorcycle. Gasoline is extremely flammable and ● the effects of deterioration from non-use of 2. Change the engine oil if more than 4 is explosive under certain conditions. -
Page 53: Safe Driving
SAFE DRIVING PREPARATION BEFORE DRIVING Performing daily inspection ● Putting on the protective gears (Helmet, glove, goggles, etc.) ● Bringing the driver's licence ● Determinating the path to the desired destination ●... -
Page 54: Driving Method
DRIVING METHOD... -
Page 55: Precaution When Driving
PRECAUTION WHEN DRIVING Secure the safe distance. If any abnormality is found, stop driving and contact service ● ● Drive protectively. center to inspect the vehicle. ● Do not obstruct the traffic. Restart the vehicle after 2~3 min when it is turned over. ●... -
Page 56: Starting
STARTING Prior to starting always look around to avoid accident. Get on the vehicle after pulling back the stand. ● Start driving slowly after turning on the winker and releasing the brake while ensuring the safety around the vehicle. CAUTION Return the side stand to its original position. -
Page 57: Turning Method
TURNING METHOD PRINCIPLE OF TURN EFFECT OF SPEED CENTRIFUGAL FORCE GRAVITY The centrifugal force increases in inverse portion to the radius The basic principle of turn is balancing using the centrifugal of a curve and in portion to the square speed. Decelerate prior force which makes vehicle go outside and the gravity which to entering the curved way to reduce the centrifugal force. -
Page 58: Positions Of Turning
3 POSITIONS OF TURNING The basic principle of turn is balancing using combined force of < LEAN-IN > the centrifugal force and the gravity. This is a turning position with driver leaned inside more than All 3 positions require straightening the head and keeping the motorcycle. -
Page 59: Turning Method
TURNING METHOD < LEAN-OUT > This is a turning position with motorcycle leaned inside more than driver, which is opposite to the lean-in position. With this position, quick turn is well performed and driver can obtain wide front visual field adequate to drive on the rained or slippy road because it has best road holding. -
Page 60: Precaution When Turning
PRECAUTION WHEN TURNING Do not drive inside of large truck's turn circle. < DEAD ANGLE ZONE > < DISTANCE BETWEEN THE FRONT AND REAR WHEEL TURN > Dead angle zone is the sight range which cannot be identified by It is distance between path of the front and rear wheel and driver and increases in proportion to the width of the vehicle. -
Page 61: Braking Method
BRAKING METHOD BASIC PRINCIPLE OF BRAKE (FRICTION FORCE) RESTRAINT OF BRAKE EFFECT (INERTIA) Vehicle is braked using friction between road surface and ● tires. Braking distance increases 1.5 times on wet road and 3 ● times on icy road because friction force of road surface is decreased. -
Page 62: Braking Method
BRAKING METHOD IMPACT WHEN COLLISION Learn the proper braking method to prevent accident. Turn the throttle grip to its original position and decelerate ● using the engine brake. Erect the vehicle straight. ● Brake using both front and rear brakes. ●... -
Page 63: Wiring Diagram
WIRING DIAGRAM... - Page 64 MEMO :...
- Page 65 MEMO :...
- Page 66 MEMO :...
- Page 67 2007. 01 PRINTED NO COPY 2006. 12 PUBLICATION...
- Page 68 HEAD OFFICE(FACTORY) #58, SUNG SAN-DONG, CHANG WON, KYUNGNAM, KOREA TEL: (82-55) 239-7000 / FAX: (82-2) 467-9997 OM48-0701-02E...
Need help?
Do you have a question about the ROADWIN FI - CATALOG and is the answer not in the manual?
Questions and answers