DAELIM Daystar VL125E Service Manual page 209

Hydraulic Brake
Inspection
Inspect the caliper friction surface for
damaging or crack.
Measure the caliper inside diameter.
Service Limit: 34.02mm (1.339in)
Inspect the piston outside for damaging or
crack.
Measure the piston outside diameter.
Service Limit: 33.87mm (1.333in)
Assembly
Clean the piston seal, dust seal with brake
fluid, and install of caliper into the
Install the piston into the caliper by the groove
side of piston faces the pad.
Coat the boot with the silicon grease.
Install the boot into the
exactly.
Install the pad spring to caliper. ( 15-5)
Install the caliper pin bolt, and install the
caliper bracket to caliper.
Install the brake pad to caliper. ( 15-5)
16-8
part.
part of caliper
Caliper
Caliper Piston
Bush
PistonSeal Dust Seal
Micro Meter
Pad Spring
Piston