Lubrication; Service Information - DAELIM Daystar VL125E Service Manual

2. Lubrication

Service Information

Specifications
Troubleshooting
Engine Oil Level Check
Service Information
WARNING
!
If the engine must be running to do some work, make sure the area is well ventilated. Never run the
engine in an enclosed area. The exhaust contains poisonous carbon monoxide gas that may cause loss
of consciousness and lead to death. Run the engine in an open area or with an exhausted evacuation
system in an enclosed area.
Used engine oil may cause skin cancer if repeatedly left in contact with the skin for prolonged.
Although it is unlikely to happen unless you handle used oil on a daily basis, it is still advisable to
wash your hands thoroughly with soap and water as soon as possible after handling used oil.
The oil pump can be serviced with the engine installed in the frame.
Specifications
Engine oil
1.2 (all capacity)
1.15 (after oil filter change)
Oil Capacity
1.1 (after oil change)
API Service Classification:SE or SH
Oil Viscosity:SAE10W-30
(Other viscosities shown in the chart may be
Recommendation
used when the average temperature in your
riding area is within the indicated range.)
Oil Pump
Item
Pump Body clearance
Rotor end clearance
Pump side clearance
Torque Valves
Oil Filter Screen Cap
Oil Filter Relief Valve Oval Screw
Oil Filter Cover Socket Bolt
Oil Pump Mounting Bolt
2-1 Engine Oil Change
2-1 Engine Oil Filter Element Change
2-2 Oil Pump
2-3 Lubrication Points
Standard Value
0.15~0.20(0.006~0.008)
0.15(0.006)
0.05~0.09(0.002~0.004)
1.5kgf-m(15N.m)
1.2kgf-m( 9N.m)
1.1kgf-m(11N.m)
1.1kgf-m(11N.m)
Lubrication
2-3
2-4
2-4
2-7
1 0 W
10 0 10 20 30 40
Unit : mm(in)
Service Limit
0.25(0.010)
0.20(0.008)
0.12(0.005)
2-1