DAELIM Daystar VL125E Service Manual page 21

Lubrication
Remove the oval screw, sealing washer, spring
and relief valve from oil filter cover.
Remove the oil filter element from R. crank
case cover.
Blow the oil path way of crank case cover with
compressed air, and clean.
Torque
Oil filter cover : 1.1kgf-m(11N.m)
Oval screw: 1.2kgf-m(12N.m)
Install the dowel pins and oil pump plate into
the pump body.
Install the oil pump into the right crank case
cover and tighten the bolt.
Torque : 1.1kgf-m(11N.m, 8ft-lb)
Install the right crank case cover
2-6
Oil Pump Plate Oil Pump Plate Oil Pump Plate
Oil Pump Plate Oil Pump Plate
Oil Pump Plate Oil Pump Plate Oil Pump Plate Oil Pump Plate
Oil Pump Plate Oil Pump Plate Oil Pump Plate
Mount Bolt Mount Bolt Mount Bolt
Mount Bolt Mount Bolt Mount Bolt Mount Bolt
Mount Bolt Mount Bolt
Mount Bolt Mount Bolt Mount Bolt
Dowel Pin
Dowel Pin Dowel Pin Dowel Pin Dowel Pin
Dowel Pin Dowel Pin Dowel Pin Dowel Pin
Dowel Pin Dowel Pin
Dowel Pin
Oil Pump
Oil Pump Oil Pump
Oil Pump Oil Pump Oil Pump Oil Pump
Oil Pump Oil Pump
Oil Pump Oil Pump Oil Pump