Restart Oa; Set Display Events; Set Enclosure Asset - HP Integrity Superdome 2 16-socket User Manual

RESTART OA

Command:
RESTART OA [<bay number>]
Description:
Resets the Onboard Administrator module specified by <bay number>. If no bay number is
given, then the Onboard Administrator the user is logged in to is restarted.
Access level/Bay level:
OA Administrator, OA Operator
Restrictions:
None

SET DISPLAY EVENTS

Command:
SET DISPLAY EVENTS {ON | OFF}
Description:
◦
Turns the displaying of events that are triggered by status changes in the system on or
off.
◦
This command is specific to the CLI session, and must be issued for every CLI session to
display events in that session.
Access level/Bay level:
All
Restrictions:
Only for bays for which you have privileges

SET ENCLOSURE ASSET

Command:
SET ENCLOSURE ASSET [TAG] "<asset tag>"
Description:
◦
Sets the enclosure asset tag
◦
The default enclosure asset tag is blank
Access level/Bay level:
OA Administrator, OA Operator
Restrictions:
The <asset tag> must be 0 to 32 characters long and includes all alphanumeric, underscore
(_), and dash (-) characters.
RESTART OA 73