Directory Services For Edirectory; Installing And Initializing Snap-In For Edirectory; Example: Creating And Configuring Directory Objects For Use With Ilo 2 Mp Devices In Edirectory; Creating Objects - HP ntegrity iLO 2 MP Operation Manual

Directory Services for eDirectory

The following sections provide installation prerequisites, preparation, and a working example
of directory services for eDirectory.
NOTE: LDAP Lite is not supported with eDirectory.

Installing and Initializing Snap-In for eDirectory

For instructions on using the snap-in installation application, see
Snap-Ins for Active Directory" (page
NOTE: After you install snap-ins, restart ConsoleOne and MMC to show the new entries.
Example: Creating and Configuring Directory Objects for Use with iLO 2 MP Devices
in eDirectory
The following example demonstrates how to set up roles and HP devices in a company called
samplecorp, which consists of two regions: region1 and region2.
Assume that samplecorp has an enterprise directory arranged according to that in
Figure 7-14 Roles and Devices Example
Begin by creating organizational units in each region to contain the iLO 2 MP devices and roles
specific to that region. In this example, two organizational units are created, roles and HP devices,
in each organizational unit (region1 and region2).

Creating Objects

To create iLO 2 MP objects, follow these steps:
1. Use the ConsoleOne snap-ins provided by HP to create iLO 2 MP objects in the HP devices
organizational unit for several iLO 2 MP devices.
154).
"Installing and Initializing
Figure
Directory Services for eDirectory
7-14.
163