Table of Contents
Advertisement
Target: map1/dnsendpt1
The dnsendpt1 target represents the iLO 2 MP DNS client.
Table 6-45
shows dnsendpt1 target properties.
Table 6-45 dnsendpt1 Properties
Property Name
EnabledState
Hostname
OtherTypeDescription
Verbs
cd
Changes the current default target.
help
Displays context-sensitive help.
show
Displays information.
Target: map1/enetport1/lanendpt1/ipendpt1/gateway1
The gateway1 target represents the gateway server.
Table 6-46
shows gateway1 target properties.
Table 6-46 gateway1 Properties
Property Name
AccessInfo
AccessContext
Target: map1/dnsserver1, map1/dnsserver2, map1/dnsserver3
The dnsserver1, dnsserver2, and dnsserver3 targets represent the iLO 2 MP's primary,
secondary, and tertiary DNS servers respectively.
Table 6-47
shows dnsserver1, dnsserver2, and dnsserver3 target properties
Table 6-47 dnsserver1, dnsserver2, dnsserver3 Properties
Property Name
AccessInfo
AccessContext
Verbs
show
Displays information.
help
Displays context-sensitive help.
140
Using iLO 2 MP
Description
Represents the state of iLO 2 MP
DNS.
Represents the host name currently
assigned to the iLO 2 MP.
Textual description of this protocol
endpoint.
Description
Represents the IP address of the gateway
server.
Represents access context (description)
of this access point.
Description
Represents the IP address of the DNS
server.
Represents access context (description)
of this access point.
Access and Values
Read only
The following are valid values:
Enabled: The iLO 2 MP DNS client is
enabled.
Disabled: The iLO 2 MP DNS client is
disabled.
Read-only
iLO 2 MP current host name.
Read-only
Set to DNS.
Access and Values
Read/write
The value of the property must be expressed
in dotted decimal notation.
Read-only
Set to default gateway.
Access and Values
Read/write
The value of the property must be expressed
in dotted decimal notation.
Read-only
Set to DNS server.
Advertisement
Table of Contents
