Raid Configuration And Other Utilities; Configuring A Smart Array Controller; Using The Saupdate Command; Get Mode - HP Integrity BL860C i4 User's & Service Manual

RAID configuration and other utilities

Configuring a Smart Array Controller

Using the saupdate command

The saupdate command is used to query or change the mode of the Smart Array P410i and Smart Array
P411 controllers to HBA or RAID. Querying or changing modes is not supported for other controllers.
The following are the newly added commands to saupdate:
•
get_mode
•
set_mode

Get mode

This command displays the current mode of the controllers.
NOTE:
Terminal windows should be set to a window size of 80 columns x 25 rows for optimal viewing of the
console at UEFI.
Syntax
saupdate get_mode <controller>
<controller> can be any one of the strings listed in Table 15.
Table 17: <controller> strings
<controller>
<seg:bus:dev:func>
all
<model>
Meaning
A controller having the PCI segment id, bus
id, device id and function id is addressed
Addresses all controllers in the system
Controllers of a particular type indicated by
the <model> string are addressed
RAID configuration and other utilities 133