Table of Contents
Advertisement
JUNOSe 11.1.x Service Availability Configuration Guide
Table 6: show redundancy Output Fields (continued)
Related Topics
Monitoring the Redundancy Status of Applications
Display the redundancy status of the applications.
Purpose
To display the applications that do not support high availability.
Action
host1#show redundancy clients
Unsupported High Availability Clients
---------------------
48
Monitoring the Redundancy Status of Applications
Field Name
slots
hardware role
lockout config
backed up by slot
sparing for slot
revert at
midplane type
midplane rev
fabric slice redundancy
slot
slice state
type
show redundancy
-------------------------------------
client
configuration
-------------
Field Description
Slots in which the line modules reside.
Function of the line module. Possible values: primary
or spare.
Status of redundancy on the line module:
protected Line module redundancy is enabled
locked out Line module redundancy is disabled
Slot that contains the line module that is a spare for
this primary line module.
Slot that contains the primary line module for which
this module is a spare.
Time at which you want the line module to revert.
Identifier for the type of midplane.
Hardware revision number of the redundancy
midplane.
Status of the fabric slice on the SRP modules or SFMs
on the E120 and E320 routers.
Slot in which the fabric slice resides.
State of the fabric slice. Possible values: online or not
present.
Identifier for the type of hardware. Possible values:
SRP modules or SFM modules.
Advertisement
Table of Contents
