Network - D-Link KVM-410 - Single Port KVM Switch User Manual

Section  - Configuration
The Network page contains settings specific to the network configuration of the KVM-410. The Access Ports, IP
Address, and DNS Servers are configured here:
Access Port
The Access Ports allow the administrator to
specify the port numbers that will be used to
access the device. The default Windows port is
9000 and the default Java port is 9002. These
port numbers must be specified as part of the
IP Address when connecting to the KVM-410.
The Program port specifies the port used
when connecting with the Administrator and
Windows Client programs. The Java port is
used with Java Client connections.
IP Address
The KVM-410 can have it's IP Address
assigned dynamically at boot up with DHCP,
or it can be assigned a Static IP Address
here. To assign a static address, select the
Set IP address manually button and assign
the device an IP Address, Subnet Mask, and
Default Gateway.
DNS Servers The KVM-410 can have it's DNS Servers
assigned dynamically or statically assigned.
To assign static DNS servers, select the
"Using the following DNS Server Address"
button and specify the DNS servers.
Log Server
Transactions such as logins and internal
status messages are kept in an automatically
generated log file. Specify the MAC Address
and port number for the server you want the
log server software to run on. (See p. 71)
D-Link KVM-410 User Manual

Network

1