Installation - D-Link KVM-410 - Single Port KVM Switch User Manual

Section  - Unpacking and Installation
This section provides unpacking and installation information for the KVM-410. Open the shipping carton for the
KVM-410 and carefully unpack its contents. To install the KVM-410, refer to the steps below:
1. Plug the local administrator's monitor, keyboard and mouse into the device's
Console Ports.
2. Connect the provided KVM cable to the PC/KVM port.
3. Connect the other end of the provided KVM cable to an
existing KVM switch, server or workstation.
D-Link KVM-410 User Manual

Installation

11