D-Link KVM-410 - Single Port KVM Switch User Manual page 55

Section  - Admin Programs
To delete a filter, select the filter and Click Remove.
To modify an existing filter, select it and Click Edit. The Edit dialog box is similar to the Add dialog box. When prompted,
simply delete the old address and replace it with the new one.
To enable MAC filtering for User Stations, Click the MAC Filter Enable
check box so a check mark appears.
To add a Filter:
1. Select whether the Filter will include or exclude specified User
Stations.
2. Click Add. A MAC Address dialog box will appear:
3. Specify the MAC Address to filter in the dialog box, then Click
OK.
4. Repeat these steps for any additional MAC Addresses you want
to filter.
To delete a filter, select the filter and Click Remove.
To modify an existing filter, select it and Click Edit. The Edit dialog box is similar to the Add dialog box. When prompted,
simply delete the old address and replace it with the new one.
D-Link KVM-410 User Manual
User Station Filtering - MAC Address