Settings Utility - D-Link KVM-410 - Single Port KVM Switch User Manual

Section  - Admin Programs
After successfully logging in, the KVM-410 Settings appear:
There are six tabs, General, User Management, Network,
RADIUS, Customization, and Security. Each tab contains different
administrative functions described in the following sections.
When using the KVM-410 Settings screen to configure the
KVM-410, changes to the unit can be uploaded using the following
methods:
1. If changes were made on the Network page, or if firmware
was upgraded on the Customization page, Reset on Exit
must be enabled before proceeding.
2. Click OK on the Settings Notebook to start the updating
procedure. Click Cancel to abandon the changes. When
finished, the following message appears:
3. Click OK and you will return to the Administration Utility
device selection window.
D-Link KVM-410 User Manual

Settings Utility

0