Customization - D-Link KVM-410 - Single Port KVM Switch User Manual

Section  - Configuration
The Customization page allows the administrator of the KVM-410 to set advanced parameters for users.
If the KVM-410 doesn't receive any input
Time Out Control
from a user logged using the Windows
or Java client software in the amount of
time specified here, it will terminate the
connection.
Login Failure Login Failures Allowed: Sets the number
of consecutive failed login attempts that are
permitted from a remote user.
Login Failure Timeout: Sets the amount
of time a remote user must wait before
attempting to login again after it has
exceeded the number of allowed failures.
Working Mode Stealth Mode: Enabling this mode will cause
the KVM-410 to drop all ping requests.
Echo Mode: Enabled by default, disabling
this mode will cause the KVM-410 to
not show up in the list of local KVM-410
devices.
Multi-User Enabling this option permits more than one
Operation user to log into the KVM-410 at the same
time.
Checking the Reset on exit option will cause
Reset Config
the KVM-410 to reset it's configuration and
implement any new changes when you log
out. Resetting takes approximately 30-60
seconds.
D-Link KVM-410 User Manual

Customization