D-Link KVM-410 - Single Port KVM Switch User Manual page 17

Section  - Configuration
The KVM-410 Main Page defaults to the General settings. The administration settings are located in the menu tabs at
the top of the page, and are used to configure the KVM-410. The Main Page also has a menu on the left side of the
page that contains options that aid in the operation of the KVM-410. Those options include:
• Apply - Saves the changes you make in the administration dialog boxes, but does not implement the
changes. The changes only go into effect when you enable the Reset on Exit option (see p. 28) and log
out of the device.
• Windows Client - Allows users with the proper permission to connect to the KVM-410 using the Windows
client software, and to remotely control the connected server or servers via a KVM switch. Selecting this
option launches the browser based version of the utility.
• Java Client - The Java Client allows for platform independence by allowing users with the proper permission
and Java applet installed to connect to the KVM-410 and remotely control the connected server or servers.
Selecting this option launches the browser based version of the utility.
• Power Management - Allows users with the proper permission to control any Power over Ethernet
modules connected to the KVM-410 through the power management interface.
• Log - Allows users with the proper permission to view a log file of all the events that take place on the
KVM-410.
• Logout - Clicking this button will log the user out and end their KVM-410 session. It is important for users
to log out and end their session, otherwise they must wait until the Timeout period has expired before
they can access the KVM-410 again.
D-Link KVM-410 User Manual 1