D-Link KVM-410 - Single Port KVM Switch User Manual page 42

Section  - Java Client
Clicking the Adjust Video button brings up the Video Settings dialog box:
Screen Position
Adjust the horizontal and vertical position of the remote computer
window by Clicking the Arrow buttons.
Auto-Sync
Click Auto-Sync to have the function detect the vertical and
horizontal offset values of the remote screen and automatically
synchronize it with the local screen. If the local and remote mouse
pointers are out of sync, in most cases, performing this function
will bring them back into sync.
This function works best with a bright screen. If you are not
satisfied with the results, use the Screen Position arrows to
position the remote display manually.
RGB
Drag the slider bars to adjust the RGB (Red, Green, Blue) values.
When an RGB value is increased, the RGB component of the
image is correspondingly increased.
Video Quality Drag the slider bar to adjust the overall Video Quality. Values can be from 20 to 100. The larger the value, the clearer
the picture and the more video data goes through the network. Depending on the network bandwidth, a high value
may adversely effect response time.
Sense
If you need to adjust the gamma level of the remote video display, put a check mark in the Enable box, then drag
the slider bar until the desired result is obtained.
D-Link KVM-410 User Manual
Video
4