D-Link KVM-410 - Single Port KVM Switch User Manual page 36

Section 4 - Windows Client
An explanation of the actions is given in the table below:
Action
Exit remote location
Adjust Video
Toggle OSD
Toggle mouse display If you find the display of the two mouse pointers (local and remote) to be
Adjust mouse
Substitute Alt key
Note: To invoke an action, you must press and release the keys one key at a time. Do not press the keys
all at once.
D-Link KVM-410 User Manual
Break the connection to the KVM-410 and return to local operation.
Bring up the video adjustment utility.
Toggles the OSD display Off and On.
confusing, you can use this function to shrink the non-functioning pointer
down to a barely-noticeable tiny circle. Since this function is a toggle - use the
hotkeys again to bring the mouse display back to its original configuration.
This utility synchronizes the local and remote mouse movements following a
video resolution change. After invoking this utility, simply click the local mouse
pointer on top of the remote mouse pointer.
Although all other keyboard input is captured and sent to the KVM-410
[Alt + Tab] and [Ctrl + Alt + Del] only work on your local computer. In order
to implement their effects on the remote system, a function key has to be
substituted for the Alt key. If you substitute the F12 key, for example, you
would use [F12 + Tab] and [Ctrl + F12 + Del].
Explanation