Video Adjustment - D-Link KVM-410 - Single Port KVM Switch User Manual

Section 4 - Windows Client
You can adjust the placement and the picture quality of the remote screen with the Video Options function. To do so,
either click on the Hammer icon on the OSD Control Panel, or use the Adjust Video hotkeys. The following screen
appears.
Screen Position
Adjust the horizontal and vertical position of the remote
computer window by Clicking the Arrow buttons.
Auto-Sync
Click Auto-Sync to have the function detect the vertical
and horizontal offset values of the remote screen and
automatically synchronize it with the local screen. If the
local and remote mouse pointers are out of sync, in most
cases, performing this function will bring them back into
sync.
This function works best with a bright screen. If you are not
satisfied with the results, use the Screen Position arrows
to position the remote display manually.
RGB Drag the slider bars to adjust the RGB (Red, Green,
Blue) values. When an RGB value is increased, the RGB
component of the image is correspondingly increased.
Video Quality Drag the slider bar to adjust the overall Video Quality. Values
can be from 20 to 100. The larger the value, the clearer
the picture and the more video data streams through the
network. Depending on the network bandwidth, a high value
may adversely effect response time.
Sense If you need to adjust the gamma level of the remote video display, put a check mark in the Enable box, then drag
the slider bar until the desired result is obtained.
D-Link KVM-410 User Manual

Video Adjustment