Troubleshooting Loose Connections - Cisco 5580-40 - ASA Firewall Edition Hardware Installation Manual

Troubleshooting Loose Connections

Close the processor memory module cover, see
Step 14
Figure 4-23
Install the fan by positioning the fan over the slot so that the connector below the fan indicator lines up
Step 15
with the connection on the motherboard. Push down until the fan clicks into place.
Power on the ASA.
Step 16
Troubleshooting Loose Connections
Perform the following actions to troubleshoot loose connections on the ASA 5580 adaptive security
appliance:
•
•
•
Cisco ASA 5580 Series Adaptive Security Appliance Hardware Installation Guide
4-24
Closing the Module Cover
Make sure all power cords are securely connected.
Make sure all cables are properly aligned and securely connected for all external and internal
components.
Remove and check all data and power cables for damage. Make sure no cables have bent pins or
damaged connectors.
Chapter 4 Maintenance and Upgrade Procedures
Figure 4-23.
OL-12920-01