Undoing A Command Or Feature - Cisco AS5350 - Universal Access Server Configuration Manual

Chapter 1 Understanding Basic Hardware Architecture and Cisco IOS Software
Command
Step 7
Router(config-controller)# ds0-group 1 timeslots ?
ds0-group
Step 8
Router(config-controller)# ds0-group 1 timeslots
1-24 ?
service
type
Step 9
Router(config-controller)# ds0-group 1 timeslots
1-24 type ?
e&m-fgb
e&m-fgd
e&m-immediate-start
fxs-ground-start
fxs-loop-start
sas-ground-start
sas-loop-start
Step 10
Router(config-controller)# ds0-group 1 timeslots
1-24 type e&m-fgb ?
dtmf
mf
service
<cr>
Step 11
Router(config-controller)# ds0-group 1 timeslots
1-24 type e&m-fgb dtmf ?
dnis
service
<cr>

Undoing a Command or Feature

If you want to undo a command you entered or disable a feature, enter the keyword no before most
commands; for example, no ip routing.
OL-3418-02 B0
<1-24> List of timeslots which comprise the
Specify the type of service
Specify the type of signaling
E & M Type II FGB
E & M Type II FGD
E & M Immediate Start
FXS Ground Start
FXS Loop Start
SAS Ground Start
SAS Loop Start
DTMF tone signaling
MF tone signaling
Specify the type of service
DNIS addr info provisioned
Specify the type of service
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
Exploring Cisco IOS Software
Purpose
Displays the range for the timeslot
option. Specify a timeslot range of
values from 1 to 24. You can specify
timeslot ranges (for example, 1-24),
individual timeslots separated by
commas (for example 1, 3, 5), or a
combination of the two (for example 1-3,
8, 17-24). The 16th timeslot is not
specified in the command line, because it
is reserved for transmitting the channel
signaling.
Displays the two commands (service and
type) available for the timeslots.
Lists supported signaling types.
Displays the types of channel-associated
signaling available for the e&m-fgb
type.
Displays the options supported for the
DTMF tone signaling option.
1-9