Getting Software Licenses For Cisco Vg310 And Cisco Vg320 Voice Gateways; Activating A New Software Package Or Feature - Cisco VG310 Hardware Installation Manual

Getting Software Licenses for Cisco VG310 and
Cisco VG320 Voice Gateways
The Cisco VG310 and Cisco VG320 come with an evaluation license, also known as a temporary license,
for most packages and features supported on the voice gateway. To try a new software package or feature,
activate the evaluation license for that package or feature. The licensing provisions provided by the licensing
package offer greater flexibility to deploy new features while also improving visibility and management of
existing licenses on the voice gateways in the network.
When you order a new Cisco VG310 or a Cisco VG320, it is shipped with the software image and the
corresponding permanent licenses preinstalled for the packages and features that you specified. The software
does not need to be activated or registered before use.
Use the Cisco management application such as Cisco License Manager (CLM) to determine the licenses
activated on your system. CLM is a free software application available at: http://www.cisco.com/go/clm.
The following sections are included in this chapter:
•
•

Activating a New Software Package or Feature

Before You Begin
You must have the serial number of Cisco VG310 or Cisco VG320, where the license should be installed.
Note
For information on locating the serial number, see
OL-31292-01
Activating a New Software Package or Feature, page 61
RMA License Transfer, page 62
C H A P T E R
Locating the Product Serial Number, on page
Cisco VG310 and Cisco VG320 Voice Gateways Hardware Installation Guide
5
3.
61