Cisco AS5350 - Universal Access Server Configuration Manual page 124

Interface Queue Wedge Monitor
Step 6 Enable the Interface Queue Wedge Monitor again.
AS5400##conf t
Enter configuration commands, one per line.
AS5400#(config)#interface-monitor enable
AS5400#(config)#^Z
AS5400##
AS5400##
AS5400##
12:00:50: %HHM-3-INTFWEDGE: Async4/00 Input Queue Wedge
12:00:53: %HHM-3-INTFWEDGE: Async4/01 Input Queue Wedge
12:00:56: %HHM-3-INTFWEDGE: Async4/02 Input Queue Wedge
12:00:59: %HHM-3-INTFWEDGE: Async4/03 Input Queue Wedge
12:01:02: %HHM-3-INTFWEDGE: FastEthernet0/0 Input Queue Wedge
12:01:05: %HHM-3-INTFWEDGE: FastEthernet0/1 Input Queue Wedge
12:01:26: %HHM-3-INTFWEDGE: Virtual-Access2 Input Queue Wedge
12:01:29: %HHM-3-INTFWEDGE: Virtual-Access3 Input Queue Wedge
AS5400##
AS5400##
Show interface wedge process running again. (Process is running now.)
Step 7
AS5400##sh proc cpu | i Intf
39
AS5400##
Show wedge input.
Step 8
Here is the o/p again
---------------------
AS5400##sh wedged-interfaces input
Interface
Async4/00
Async4/01
Async4/02
Async4/03
FastEthernet0/0
FastEthernet0/1
Virtual-Access2
Virtual-Access3
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
5-26
8 110 72
Time Since Wedge
00:24:14
00:24:06
00:23:42
00:23:37
12:00:44
12:01:01
00:11:02
00:11:02
Chapter 5 Managing and Troubleshooting the Universal Port Card
End with CNTL/Z.
0.00% 0.00% 0.00% 0 Intf Wedge Monit
OL-3418-02 B0