Cisco AS5350 - Universal Access Server Configuration Manual page 10

Universal gateway software configuration guide
Hide thumbs Also See for AS5350 - Universal Access Server:
Table of Contents

Advertisement

Organization and Use
Table 1
Chapter
Chapter 6
Appendix A
Appendix B
Appendix C
The following details where you can find your basic and advanced configuration information:
Chapter 1—Get familiar with your Cisco AS5350 or Cisco AS5400, learn how to use the
command-line interface (CLI), and upgrade your Cisco IOS software, if necessary.
Chapter 2—Analyze your system, execute basic tasks and system configuration.
Chapters 3 and 4—Begin to commission the Cisco AS5350 or Cisco AS5400 using the
command-line interface (CLI).
The remaining chapters and appendixes—Reference these for your additional configuration,
management, and troubleshooting needs.
To obtain advanced feature-configuration information that is supported on your Cisco AS5350 or
Cisco AS5400 universal gateway, you can go to the following locations:
Cisco AS5350 or Cisco AS5400 platform website, which includes platform-specific documentation
such as hardware books and release notes
Note
Cisco Technical Assistance Center website for the Cisco AS5350 and Cisco AS5400 universal
gateways, available at
http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Hardware:AS5350
and
http://www.cisco.com/pcgi-bin/Support/PSP/psp_view.pl?p=Hardware:AS5400
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
x
Document Organization (continued)
Title
Configuring Voice over IP
Using the Setup Script
ROM Monitor
Comprehensive Configuration Examples
Cisco AS5350 (or Cisco AS5400) Universal Gateway Chassis Installation Guide
Cisco AS5350 (or Cisco AS5400) Universal Gateway Card Installation Guide
Cisco AS5350 (or Cisco AS5400) Universal Gateway Regulatory Compliance and Safety
Information
The Cisco AS5350 and Cisco AS5400 platform websites are available online at
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5350/index.htm
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5400/index.htm
Monitoring Voice and Fax Services on the Cisco AS5400 Universal Gateway, available at
http://www.cisco.com/univercd/cc/td/doc/product/software/.
Select your Cisco IOS release and search for this title.
Organization and Use
Description
Provides a brief overview of the VoIP call
process and explains how to configure
VoIP on your gateway.
Describes how to power on the gateway
and configure it using the prompt-driven
setup script.
Describes how to use theROM monitor to
isolate or rule out hardware problems
encountered when installing your gateway.
Provides basic and advanced configuration
examples for reference.
and
OL-3418-02 B0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

As5400

Table of Contents