Viewing Spe Performance Statistics - Cisco AS5350 - Universal Access Server Configuration Manual

Chapter 5 Managing and Troubleshooting the Universal Port Card
•
•
•

Viewing SPE Performance Statistics

You can view SPE statistics using the Cisco IOS software with the gateway. To view performance
statistics for the universal port cards, enter one or more of the following commands in privileged EXEC
mode (at the
show spe voice Commands
•
•
show spe digital Commands
•
•
•
•
show spe modem Commands
•
•
•
OL-3418-02 B0
clear spe log—Allows you to clear all event entries in the slot history event log.
clear spe counters—Clears statistical counters for all types of services for the specified SPE, SPE
range, or all the SPEs. If you do not specify the range of SPEs or a SPE, all SPEs' statistics are
cleared. It is used in the same way the clear modem counters command is used for MICA modems.
clear port log—Allows you to clear all event entries in the port level history event log. This
command clears the entire port log. You cannot remove individual service events from the port log.
You can use show port modem log or show port digital log to display specific service events, but
you must use clear port log to clear the entire port log.
or
AS5350# AS5400#
show spe voice active—Displays the active statistics of all SPEs, a specified SPE, or a specified
SPE range serving voice traffic.
show spe voice slot | slot/spe summary—Displays the history statistics of all SPEs in a particular
slot, specified SPE, or specified SPE range serving voice traffic.
show spe digital active—Displays the active statistics of all SPEs, a specified SPE or a specified
SPE range serving digital traffic.
show spe digital csr—Displays the digital call success rate statistics for a specific SPE, range of
SPEs, or all the SPEs.
show spe digital disconnect-reason—Displays the digital disconnect reasons for the specified SPE
or SPE range. The disconnect reasons are displayed with Class boundaries.
show spe digital slot | slot/spe summary—Displays the history statistics of all SPEs in a particular
slot, specified SPE or the specified SPE range serving digital traffic.
show spe modem active—Displays the active statistics of all SPEs, a specified SPE, or a specified
SPE range serving modem traffic. It is used in the same way the show modem command is used for
MICA modems. (The show modem command is not supported on the Cisco AS5350 or
Cisco AS5400.)
show spe modem csr—Displays the call success rate statistics for a specific SPE, range of SPEs, or
all the SPEs.
show spe modem disconnect-reason—Displays the disconnect reasons for the specified SPE or
SPE range. The disconnect reasons are displayed with Class boundaries. It is used in the same way
the show modem call-stats command is used for MICA modems. (The show modem call-stats
command is not supported on the Cisco AS5350 or Cisco AS5400.)
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
prompt):
Managing SPE Performance Statistics
5-3