Spe Firmware - Cisco AS5350 - Universal Access Server Configuration Manual

Chapter 3 Basic Configuration Using the Command-Line Interface
For further information, refer to
Note
For detailed information about CLI commands supported on the universal port card, refer to Monitoring
Voice and Fax Services on the Cisco AS5400 Universal Gateway, available online at
http://www.cisco.com/univercd/cc/td/doc/product/software/. Select your Cisco IOS release and search
for this title.

SPE Firmware

SPE firmware is automatically downloaded to a universal port card from the Cisco AS5350 or
Cisco AS5400 when you boot the system for the first time or when you insert a universal port card while
the system is operating. When you insert cards while the system is operating, the Cisco IOS image
recognizes the cards and downloads the required firmware to the cards.
The SPE firmware image is bundled with the gateway Cisco IOS image. The SPE firmware image uses
an auto detect mechanism, which enables the universal port card to service multiple call types. An SPE
detects the call type and automatically configures itself for that operation. The firmware is upgradable
independent of Cisco IOS upgrades, and different firmware versions can be configured to run on SPEs
in the same card.
The universal port card supports the modem standards and features listed in
Table 3-4
Feature
Carrier protocols
Error-correcting link-access protocols V.42 LAPM, MNP 2-4
Compression protocols
Command interface
OL-3418-02 B0
Chapter 5, "Managing and Troubleshooting the Universal Port Card."
Modem Standards and Supported Features
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
Configuring the Universal Port Card and Lines
Description
ITU V.23 at 75/1200 bps
Telcordia Technologies (formerly Bellcore) 103 at 300 bps
ITU V.21 at 300 bps
ITU V.22 at 1200 bps
Telcordia Technologies (formerly Bellcore) 212A at 1200 bps
ITU V.22bis at 2400 bps
ITU V.32 up to 9600 bps
ITU V.32bis up to 14,400 bps
V.32 turbo up to 19,200 bps
V.FC up to 28,800 bps
V.34 up to 28,800 bps
V.34+ up to 33.6 bps
TIA/ITU V.90
K56flex
V.42bis (includes MNP 5)
Superset of the AT command set
Table 3-4.
3-27