Using The Web Interface; Using The Command Line Interface (Cli); Changing The Admin Account Password - Cisco Expressway CE1000 Appliance Installation Manual

Configuring
6. After the wizard is finished the following message will appear:
Setting other settings...OK.
The system must be restarted for new
settings to take effect..
And you will get a restart prompt:
Restart Now?
Type y and press Enter.
7. After it has rebooted, the Cisco Expressway is ready to use. You can access the Cisco Expressway's
web interface via the IP address assigned to the LAN 1 Ethernet port.
Note: for security reasons you are advised to change the password for the
have not already done so) and the

Using the web interface

To use the web interface:
1. Open a browser window and in the address line type either:
the IP address of the Cisco Expressway
l
the FQDN of the Cisco Expressway
l
The Login page will appear.
2. Select Administrator Login.
3. Enter a valid administrator username and password and select Login.
You will be presented with the
See the online help or Cisco Expressway Administrator Guide for information on the configuration options
available for each page of the Cisco Expressway web interface.

Using the Command Line Interface (CLI)

The command line interface is available over SSH and through the serial port by default.
To use the command line interface:
1. Start an SSH session.
2. Enter the IP address or FQDN of the Cisco Expressway.
3. Login with a username of admin and your system password.
You will see a welcome message.
For a full list of CLI commands available on the Cisco Expressway, see Cisco Expressway Administrator
Guide.

Changing the admin account password

To change the password for the admin account using the web interface:
1. Go to Users > Administrator
2. Click on View/Edit for the admin name.
3. In the Password and Confirm password fields, enter the new password, and click Save.
The Password strength box will indicate how secure your chosen password is.
Cisco Expressway CE1000 Appliance Installation Guide (8.5)
root account from the default of TANDBERG.
Overview page.
accounts. You are taken to the
default admin account
Administrator accounts
(if you
page.
Page 10 of 16