Appendix; Working With The Cisco Ios File System, Configuration Files, And Software Images; Working With The Flash File System - Cisco Catalyst 2950 Software Configuration Manual

Hide thumbs Also See for Catalyst 2950:

Table of Contents

Working with the Cisco IOS File System,

Configuration Files, and Software Images

This appendix describes how to manipulate the Catalyst 2950 or 2955 flash file system, how to copy

configuration files, and how to archive (upload and download) software images.

For complete syntax and usage information for the commands used in this chapter, see the command

reference for this release and the Cisco IOS Configuration Fundamentals Command Reference,

Release 12.1.

This appendix consists of these sections:

The flash file system on your switch provides several commands to help you manage software image and

configuration files.

The flash file system is a single flash device on which you can store files. This flash device is called

This section contains this information:

Working with the Flash File System, page B-1

Working with Configuration Files, page B-8

Working with Software Images, page B-19

Displaying Available File Systems, page B-2

Setting the Default File System, page B-3

Displaying Information about Files on a File System, page B-3

Creating and Removing Directories, page B-4

Copying Files, page B-5

Deleting Files, page B-5

Creating, Displaying, and Extracting tar Files, page B-6

Displaying the Contents of a File, page B-8

A P P E N D I X

Catalyst 2950 and Catalyst 2955 Switch Software Configuration Guide

Show Quick Links

Table of Contents

Troubleshooting

Catalyst 2955