HP 166207-B21 - Smart Array 5302/32 RAID Controller Reference Manual page 90

Error Error message
code
3006 Invalid Number of Parity Groups
3007 Chassis name is too long
3008 Chassis name is already in use
3009 Auto Configure failed
3010 Cannot extend logical drive, not enough
free space for the requested size
3011
Cannot extend logical drive, requested
size is too small
3012 Cannot specify both SIZE and
SHRINKSIZE
3013 Cannot shrink Array
3014 Cannot move Array
3015 Invalid operation - Advanced Pack
support required
3016
Spare drives cannot be specified by a
count in Reconfigure mode
3017 Disk drives cannot be specified by a
count in Reconfigure mode
3018 Invalid number of physical disks
3019
Cannot create Array - no physical disks
specified
3020 SSP must be enabled in order to perform
this operation
3021 Invalid connection name
3022
The connectionname cannot be
removed when the hostmode has a non-
default value.
3023 Invalid Host Mode
3024 Invalid Adapter ID
3025 This controller does not have host mode
modification capability
3026
You need to have administrator rights to
continue.
3027 Another instance of ACU is already
running (possibly a service). Please
terminate the ACU application before
running ACU scripting.
Comment or clarification
—
—
Another controller is already using the entered
chassis name.
The Auto Configure mode was unable to complete
auto configuration.
—
—
The input file cannot specify both a SIZE and
SHRINKSIZE parameter.
The array shrink operation was not successful.
The array move operation was not successful.
The requested operation requires a valid license
key to be entered.
When in Reconfigure mode, the requested spare
drives must be specified by their addresses. A
simple count cannot be used.
When in Reconfigure mode, the requested data
drives must be specified by their addresses. A
simple count cannot be used.
—
ACU cannot create an array unless physical disks
are specified in the input file DRIVE parameter.
For the specified operation, ACU requires SSP to
be supported and enabled.
—
—
—
—
—
—
—
HP Array Configuration Utility 90