HP Online Array Configuration Utility for
The HP Online Array Configuration Utility for NetWare (CPQONLIN) enables you to configure an array
on a NetWare server while the server is online.
To configure an array when the server is offline, use ACU
To install CPQONLIN, obtain the appropriate Smart Component from the HP website
(http://www.hp.com/support) or the software CD that is provided with the controller. When prompted for
product information, enter the appropriate server model name. Installation instructions are provided with
Summary of configuration procedure using
At the console prompt, enter cpqonlin.
Press the arrow keys to scroll the highlight to the Array Configuration Utility menu item, and then
press the Enter key.
The screen displays a list of the controllers in the server.
Scroll to the controller that you want to configure and then press the Enter key.
If there are no logical drives connected to the controller, an auto-configuration wizard opens and
displays the optimum configuration for the drives on the controller. You can accept the suggested
configuration, modify just the RAID level of any logical drives, or use the Custom Configuration
option to completely reconfigure the drives manually
If there is at least one logical drive connected to the controller, CPQONLIN continues in manual
the arrow, Enter, and Esc keys to navigate around the screen and set up the new logical drive.
To get online help at any time, press the F1 key.
When you have finished configuring the array, save the changes as prompted.
To make new logical drives available for data storage, format them using the instructions given in
the operating system documentation.
CD" on page 26).
mode" on page 15).
("Operating CPQONLIN in manual configuration
("Configuring a server using ACU located on
("Operating CPQONLIN in manual
mode" on page 15). Press
HP Online Array Configuration Utility for NetWare 14