Table of Contents
Advertisement
A list of all possible options for that task appears on the right side of the screen, replacing the task
list.
Select the settings or configuration options for the device.
4.
Use the Next and Back buttons to navigate multiple screens of options.
5.
Click Save or OK.
6.
Working with mirrored arrays
Among the advanced tasks possible with the ACU GUI, you can split a mirrored array and then
recombine it. This process entails breaking a RAID 1 or RAID 1+0 mirror into two identical new arrays
consisting of RAID 0 logical drives.
Support for these procedures requires the following:
•
The ACU GUI must be run in offline mode
SmartStart
•
Select controller models must have a valid SAAP license
•
Mirrored arrays being split can have RAID 1 or RAID 1+0 configurations. Arrays with other RAID
configurations cannot be split.
Several reasons exist for splitting and recombining a mirrored array. For more information, see the "RAID
1(+0): breaking mirrors and rebuilding drives" how-to white paper on the HP website
(http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00378986/c00378986.pdf).
CD" on page 26).
("Configuring a server using ACU located on the
("About
SAAP" on page 8).
HP Array Configuration Utility 43
Hide quick links:
Advertisement
Table of Contents
