Using The Orca Cli - HP 166207-B21 - Smart Array 5302/32 RAID Controller Reference Manual

To install a license key:
Power up the server.
1.
POST runs.
During POST, all controllers in the server are initialized one at a time in the current boot order
sequence. If a controller is connected to one or more hard drives, a message appears during the
initialization process for that controller, prompting you to start ORCA.
At the ORCA prompt for the controller that you want to configure, press the F8 key.
2.
The ORCA main menu appears.
Select Manage License Keys.
3.
This option appears only if the Smart Array controller has a 256-MB, or larger, cache installed.
Under the License Key menu, select Add License Key.
4.
Enter the license key in the space provided.
5.
ORCA issues a notification after the license key activates successfully.
To use SAAP features, use the HP Array Configuration Utility. For more information, see "Configuration
tasks (on page 40)."

Using the ORCA CLI

Power up the server.
1.
POST runs.
Option ROM Configuration for Arrays 12