Table of Contents
Advertisement
Highlight the Accept Changes option, and then press the Enter key.
8.
Press the Esc key to begin the array expansion and return to the Logical Configuration View panel.
9.
To view the progress of the array expansion, press the F3 key, and then scroll to the progress bar near the
bottom of the screen.
Migrating RAID level or stripe size
When you want to migrate the RAID level or stripe size, allow about 15 minutes per gigabyte for the
migration to be completed. During this time, the controller cannot perform any other expansion or
migration. Performance might be degraded slightly during the migration, depending on the Expand
Priority and Rebuild Priority settings
minimize any effect on normal server operations, migrate during periods of low server use.
To perform a migration:
Back up all data on the array. Although migration is unlikely to cause data loss, observing this
1.
precaution provides extra data security.
Confirm that the cache battery is connected and fully charged.
2.
In the Logical Configuration View panel, highlight the logical drive and then press the Enter key.
3.
The highlight moves to the Logical Drive Options panel.
Highlight the Drive Settings option, and then press the Enter key.
4.
The Drive Settings panel appears.
Modify the Fault Tolerance and Stripe Size settings on this panel to meet your needs.
5.
Press the Esc key to begin the migration and return to the Logical Configuration View panel.
6.
To view the progress of the migration, press the F3 key, and then scroll to the progress bar near the
bottom of the screen.
("Setting the rebuild priority or expand
HP Online Array Configuration Utility for NetWare 20
priority" on page 18). To
Hide quick links:
Advertisement
Table of Contents
