Table of Contents
Advertisement
In previous versions of ACU, this functionality was called the Configuration Wizards mode and
Express mode. For more information about this screen, see "Wizards screen (on page 37)."
•
The Controller/Device pull-down menu is below the tabs.
To select a device, click on the menu, and then select a device. Use the scroll bar to view all the
devices, as needed.
•
The Rescan System button is to the right of the menu.
After adding or removing devices, click Rescan System to update the list of available devices.
•
The Help button is near the top right of the screen.
To access help topics, press the H key or click Help. For more information, see "ACU Help (on page
40)."
•
The Exit ACU button is near the bottom left of the screen.
With the exception of the Diagnostics screen views, these elements remain visible at all times.
Configuration screen
To access this screen, click the Configuration tab.
The Configuration screen displays the GUI elements from the Welcome screen and provides status, more
detailed information, and available tasks or options for the selected device.
When a device is selected, the following elements appear:
•
System Status—This panel, at left, provides the following information and functionality:
Date and time stamps for the status
o
A Refresh button to refresh the status
o
Status icons (critical, warning, and informational) with the number of individual alerts for each
o
category
HP Array Configuration Utility 29
Hide quick links:
Advertisement
Table of Contents
