HP 166207-B21 - Smart Array 5302/32 RAID Controller Reference Manual page 45

When SSP is first enabled, all logical drives are restricted by default. Administrators can grant or deny
access to each logical drive. Disabling SSP for a target means that users have unrestricted access to all
logical drives on that target.
From the Access Control (SSP) screen, you can perform tasks related to controllers, arrays, logical drives,
and initiators.
When a controller or device is selected, the tasks that appear are a subset of the total number of possible
tasks for the selected item. ACU lists or omits tasks based on the controller model and configuration.
The following table lists all the possible tasks for every type of item.
Item
Controller
(target)
Array
Logical drive
Initiator
Performing an Access Control (SSP) task
Open ACU.
1.
For more information, see "Using the ACU GUI (on page 21)."
If ACU is already open, click the Access Control (SSP) tab.
Select a device from the Controller/Device menu.
2.
Tasks
Disable SSP
Enable SSP
More Information
View Status Alerts
More Information
View Status Alerts
Manage Access
More Information
View Status Alerts
Edit Connection Name
Host Mode Settings
More Information
View Status Alerts
HP Array Configuration Utility 45