Creating A Logical Drive With Orca - HP 166207-B21 - Smart Array 5302/32 RAID Controller Reference Manual

The server reboots, and then POST runs again.
During POST, all controllers in the server are initialized one at a time in the current boot order
sequence. If a controller is connected to one or more hard drives, a message appears during the
initialization process for that controller, prompting you to start ORCA.
At the ORCA prompt for the controller that you want to configure, press the F8 key.
2.
The ORCA main menu appears, enabling you to do the following:
Create, view, or delete a logical drive
o
Enter an SAAP license key
o

Creating a logical drive with ORCA

Power up the server.
1.
POST runs.
During POST, all controllers in the server are initialized one at a time in the current boot order
sequence. If a controller is connected to one or more hard drives, a message appears during the
initialization process for that controller, prompting you to start ORCA.
At the ORCA prompt for the controller that you want to configure, press the F8 key.
2.
("Creating a logical drive with
("Installing a license key with
ORCA" on page 10)
ORCA" on page 11)
Option ROM Configuration for Arrays 10