The HBA category has the following options:
ConnectionName (on page 86)
HBA_WW_ID (on page 86)
HostMode (on page 86)
This option is a user-defined string used as the connection name for the specified HBA.
The string can consist of:
A maximum of 16 characters
Embedded space characters but cannot end with a space character
Any of the following characters: a–z, A–Z, 0–9, !, @, #, *, (, ), -, _, +, :, ., /, and [space]
This option specifies which HBA, based on its assigned WWN, is modified by the configuration changes.
This option specifies the HostMode for a selected HBA. Setting the Host Mode optimizes the storage array
for the selected operating system. The available host modes for an HBA are device-specific. Not all
modes are available on all devices. Not all HBAs support a HostMode.
The following operating system options might be available:
ACU scripting warning messages
License key is already installed
Clear configuration command failed -
configuration is already cleared
Comment or clarification
The input file specified a license key. However,
a license key is already installed on the
The -reset option was used on a controller
that does not have a configuration
HP Array Configuration Utility 86