Attaching Behaviors; Editing Behaviors; To Change The Mouse Event That Activates The Behavior - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

Attaching behaviors

Using the Behaviors panel, you can attach a behavior to a slice. You can also attach more than
one behavior.
To attach a behavior to a selected slice using the Behaviors panel:
1.
Click the Add Behavior button (the Plus button) in the Behaviors panel.
Add Behavior button
Remove Behavior button
2. Select a behavior from the Add Behavior button. For an explanation of each behavior, see
"Using the Behaviors panel to add interactivity to slices" on page

Editing behaviors

The Behaviors panel also gives you the ability to edit existing behaviors. You can specify the
type of mouse event (such as onClick) that triggers the behavior.
You cannot change the event for Simple Rollover and Set Nav Bar Image.

To change the mouse event that activates the behavior:

1.
Select the trigger slice or hotspot containing the behavior you want to modify.
All behaviors associated with that slice or hotspot are displayed in the Behaviors panel.
2. Select the behavior you want to edit.
3. Click the arrow beside the event and select a new event from the pop-up menu:
onMouseOver triggers the behavior when the pointer rolls over the trigger area.
onMouseOut
triggers the behavior when the pointer leaves the trigger area.
onClick
triggers the behavior when the trigger object is clicked.
onLoad triggers the behavior when the web page is loaded.
266.
Making slices interactive 267