Creating Pixel Selection Marquees; To Select A Rectangular Or Elliptical Area Of Pixels; To Select A Freeform Area Of Pixels - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

When using a selection tool, you can set the Feather option before creating a selection, or you
can feather existing selections by selecting the Live marquee box. You can also feather existing
selections using the Feather command in the Select menu. For more information, see
"Feathering a pixel selection" on page
When you select the Marquee or Oval Marquee, the Property inspector also displays three
style options:
Normal lets you create a marquee in which the height and width are independent of each
other.
Fixed Ratio constrains the height and width to defined ratios.
Fixed Size sets the height and width to a defined dimension.
The Magic Wand tool also has a Tolerance setting. For more information, see
areas of similar color" on page

Creating pixel selection marquees

The Marquee, Oval Marquee, and Lasso tools in the Bitmap section of the Tools panel allow
you to select specific pixel areas of a bitmap image by drawing a marquee around them.
If you want to be able to change the settings for your selection while using one of these
tools, be sure that you selected the Live marquee box before making your selection.

To select a rectangular or elliptical area of pixels:

1.
Select the Marquee or Oval Marquee tool.
2. Set the Style and Edge options in the Property inspector. For more information, see
"Bitmap selection tool options" on page
3.
Drag to draw a selection marquee, which defines the pixel selection.
To draw additional square or circular marquees, hold down Shift as you drag the Marquee
or Oval Marquee tool. If Live marquee is turned on while you make a series of selections,
the Live marquee feature only affects the last selection in the series.
To draw a marquee from a center point, deselect any other active marquees, and then hold
down Alt (Windows) or Option (Macintosh) as you draw.

To select a freeform area of pixels:

1. Select the Lasso tool.
2. Select an Edge option in the Property inspector. For more information, see
selection tool options" on page
3. Drag the pointer around the pixels you want to select.
56 Chapter 3: Selecting and Transforming Objects
62.
57.
55.
55.
"Selecting
"Bitmap