Saving Live Filters As Commands - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

You can rename or delete a custom Live Filter as you would any other style in the Styles panel.
For more information, see
on page 238.
You cannot rename or delete a standard Fireworks filter.

Saving Live Filters as commands

You can save and reuse a filter by creating a command based on it. Using the History panel,
you can automate all the Live Filters applied to an object by creating a command available
from the Commands menu. You can use these commands in batch processing. For more
information, see "Performing commands with a batch process" on page
To save filter settings as a command:
1. Apply the filters to the object.
2. If the History panel is not visible, select Window > History.
3. Shift-click the range of actions you want to save as a command.
4.
Do one of the following:
Select Save as Command from the History panel Options menu.
Click the Save button at the bottom of the History panel.
5. Enter a command name and click OK to add the command to the Commands menu.
202 Chapter 8: Using Live Filters
"Creating and deleting styles" on page 237
Save button
and "Editing styles"
434.s