Restoring Marquee Selections - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

5.
If the Selection box displays the word New, the New selection will be enabled in the
Operation section of the Save Selection dialog box. If a previously saved selection is selected
in the Selection box, then all of the following options will be enabled in the Operation
section.
"Replace selection" replaces the active selection in the active document with the one
specified in the Selection box.
"Add to selection" adds the active selection to the one specified in the Document and
Selection boxes.
"Subtract from selection" subtracts the active selection from the one specified in the
Document and Selection boxes.
"Intersect with selection" intersects the active selection with the one specified in the
Document and Selection boxes.
6.
Select an option in the Operation section, and then click OK.
Repeat this process for each of the marquee selections that you want to save.

Restoring marquee selections

You can restore a marquee selection that you have previously named and saved.
To restore a marquee selection:
1.
Select Select > Restore Bitmap Selection to open the Restore Selection dialog box.
2.
The Document box displays the name of the active document in which a marquee selection
has been saved. You can either leave that name as is, or select another one from the pop-up
menu if you would rather restore a marquee selection from another open document.
3. The Selection box displays the name of the selection that will be restored. If you want to
restore a different selection, select it from the pop-up menu.
4. If you want to invert the restored selection, select the Invert box.
5. If there is no active marquee selection in the current document, then New selection will be
enabled in the Operation section of the Restore Selection dialog box. If there is an active
marquee selection in the current document, then all of the following options will be
enabled in the Operation section.
"Replace selection" replaces the active selection in the active document with the one
specified in the Selection box.
"Add to selection" adds the active selection to the one specified in the Document and
Selection boxes.
Selecting pixels 65