Editing With Path Operations; Combining Path Objects; To Create One Continuous Path From Two Open Paths; To Create A Composite Path/To Break Apart A Composite Path - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

To cut a selected path:
1. Select the Knife tool in the Tools panel.
Using the eraser on Wacom pens automatically selects the Knife tool.
2.
Do one of the following:
Drag the pointer across the path.
Click on the path.
3.
Deselect the path.

Editing with path operations

You can use path operations in the Modify menu to create new shapes by combining or
altering existing paths. For some path operations, the stacking order of selected path objects
defines how the operation works. For information on arranging the stacking order of selected
objects, see "Stacking objects" on page
Using a path operation removes all pressure and speed information from the affected
paths.

Combining path objects

You can combine path objects into a single path object. You can connect the end points of
two open paths to create a single closed path, or you can join multiple paths to create a
composite path.

To create one continuous path from two open paths:

1. Select the Subselection tool in the Tools panel.
2. Select two end points on two open paths.
3. Select Modify > Combine Paths > Join.
To create a composite path:
1.
Select two or more open or closed paths.
2.
Select Modify > Combine Paths > Join.
To break apart a composite path:
1. Select the composite path.
2.
Select Modify > Combine Paths > Split.
75.
Editing paths 137