Creating Slice Objects; To Insert A Rectangular Slice Based On A Selected Object; To Draw A Rectangular Slice Object - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

Creating slice objects

You can create a slice object by drawing it with the Slice tool or by inserting a slice based on a
selected object.
The lines extending from the slice object are slice guides, which determine the boundaries of
the separate image files into which the document is split on export. These guides are red by
default.

To insert a rectangular slice based on a selected object:

1.
Select Edit > Insert > Slice. The slice is a rectangle whose area includes the outermost edges
of the selected object.
2.
If more than one object is selected, select how to apply slices:
Single
creates a single slice object that covers all selected objects.
Multiple creates a slice object for each selected object.

To draw a rectangular slice object:

1. Select the Slice tool.
2.
Drag to draw the slice object. The slice object appears on the Web Layer, and the slice
guides appear in the document.
You can adjust the position of a slice as you drag to draw it. While holding down the
mouse button, simply press and hold down the Spacebar, then drag the slice to
another location on the canvas. Release the Spacebar to continue drawing the slice.
Creating and editing slices 253