To Adjust A Specific Point In The Tonal Range - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

To adjust a specific point in the tonal range:

1. Select the image.
2.
Do one of the following to open the Curves dialog box:
In the Property inspector, click the Plus (+) button beside the Filters label, and then
select Adjust Color > Curves from the Filters pop-up menu.
If the Property inspector is partially minimized, click the Add Filters button
instead of the Plus button.
Select Filters > Adjust Color > Curves.
Applying a filter from the Filters menu is destructive; that is, it cannot be undone
except when Edit > Undo is an option. To maintain the ability to adjust, turn off, or
remove this filter, apply it as a Live Filter, as described in the first bulleted option
in this step. For more information, see
page 193.
Curves dialog box
3.
In the Channel pop-up menu, select whether you want to apply changes to individual color
channels or to all colors.
98 Chapter 4: Working with Bitmaps
Chapter 8, "Using Live Filters," on