Adjusting Smart Polygon Auto Shapes; Adjusting Spiral Auto Shapes; To Adjust The Number Of Turns In A Selected Spiral; To Open Or Close A Selected Spiral - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

Adjusting smart polygon Auto Shapes

Smart Polygons initially appear as pentagons with four control points. There are control
points for resizing and rotating, adding or removing polygon segments, increasing or
decreasing the number of polygon sides, and adding an inner polygon to the shape to create a
ring.
To resize or rotate a selected smart polygon, do one of the following:
Drag the scale/rotate control point.
Alt-drag (Windows) or Option-drag (Macintosh) the scale/rotate control point to rotate
only.
To add or remove sections from a selected smart polygon:
Drag the sections control point.
To change the number of sides on a selected smart polygon:
Drag the sides control point.
To split a selected smart polygon into segments.
Alt-drag (Windows) or Option-drag (Macintosh) the sides control point.
To resize the inner polygon of a smart polygon, do one of the following:
If the polygon has an inner polygon, drag the inner polygon control point.
If the polygon has no inner polygon, drag the reset inner polygon control point.
To reset the inner polygon of a selected smart polygon:
Click the reset inner polygon control point.

Adjusting spiral Auto Shapes

Spirals have two control points. There are control points for adjusting the number of turns in
the spiral, and for making the spiral open or closed.

To adjust the number of turns in a selected spiral:

Drag the spirals control point.

To open or close a selected spiral:

Click the open/close spiral control point.
Drawing vector objects 121