To Enable Or Disable A Live Filter Applied To An Object - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

Experiment with the settings until you get the look you want. If you want to change the filter
settings later, see "Editing Live Filters" on page
Inner Bevel pop-up window
To apply a Live Filter to selected objects:
1. Click the Add Live Filters button in the Property inspector, then select a filter from the
Add Filters pop-up menu.
The filter is added to the Filters list for the selected object.
To apply a Live Filter so that it appears to affect only a pixel selection within an
image, you can cut and paste the selection in place to create a new bitmap image,
select it, and then apply the Live Filter.
2. If a pop-up window or dialog box opens, enter the settings for the filter and then do one
of the following:
If the Live Filter has a dialog box, click OK.
If the Live Filter has a pop-up window, press Enter or click anywhere in the workspace.
3.
Repeat steps 1 and 2 to apply more Live Filters.
The order in which Live Filters are applied affects the overall filter. You can drag Live
Filters to rearrange their stacking order. For more information, see
Filters" on page

To enable or disable a Live Filter applied to an object:

Click the box next to the filter in the Filters list in the Property inspector.
Width of bevel
Contrast
Softness
Angle of bevel
Button bevel preset
200.
200.
"Reordering Live
Applying Live Filters 195