Redrawing Paths; Changing A Path’s Appearance By Varying Pressure And Speed; Cutting Paths Into Multiple Objects - MACROMEDIA FIREWORKS 8-USING FIREWORKS Use Manual

Redrawing paths

You can use the Redraw Path tool to redraw or extend a segment of a selected path while
retaining the path's stroke, fill, and effect characteristics.
To redraw or extend a segment of a selected path:
1.
From the Pen tool pop-up menu, select the Redraw Path tool.
2.
If desired, change the precision level of the Redraw Path tool by selecting a number from
the pop-up menu in the Precision box of the Property inspector. The higher the number
you select, the greater the number of points that appear on the path.
3. Move the pointer directly over the path.
The pointer changes to the redraw path pointer.
4.
Drag to redraw or extend a path segment. The portion of the path to be redrawn is
highlighted in red.
5.
Release the mouse button.
Changing a path's appearance by varying pressure and speed
You can change the appearance of a path using the Path Scrubber tools. Using varying
pressure or speed, you can change a path's stroke properties. These properties include stroke
size, angle, ink amount, scatter, hue, lightness, and saturation. You can specify which of these
properties is affected by the Path Scrubber tools using the Sensitivity tab of the Edit Stroke
dialog box. You can also specify how much pressure and speed affects these properties. For
details on setting options in the Edit Stroke dialog box, see
on page 177.

Cutting paths into multiple objects

The Knife tool allows you to slice a path into two or more paths.
136 Chapter 5: Working with Vector Objects
"Working with strokes"